NO HOT WATER? Follow These EASY Tips
NO HOT WATER? Follow These EASY Tips
Blog Article
Just about every person seems to have his or her own rationale with regards to How to Troubleshoot and Repair an Electric Water Heater.
Several contemporary residences use an electric hot water heater for their heater, due to its ease as well as ease of use. Nonetheless, much like any other electric home appliances, problems might occur with its usage, all of a sudden. It can be really irritating to get up to a cold shower as opposed to a hot one or having your bathroom with water that isn't hot adequate and even too warm. Whatever the case might be, water heater issues can be quite aggravating. Thankfully, we have actually made a list of feasible services to your hot water heater issues. There are a variety of elements that might cause much of these problems, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for security. Whatever the trouble is, getting it repaired must not pose excessive of a concern if you comply with these actions:
Check Your Power Supply:
As fundamental as this might seem, it is extremely necessary. Without sufficient power, your hot water heater will not work. So the first thing to do when your water instantly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on again. Change any type of busted or damaged fuse. Evaluate the home appliance with power after these adjustments to see if it's now working.
Inspect the Burner in the Water Heater:
If it's not a power problem, after that attempt looking into your heating element if it is still functioning. Examine each of your burner to be sure the issue isn't with any one of them. If any one of them is damaged, change that component and then check whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you may need to inspect the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature reset over the thermostat. This need to aid heat the water. Turn the circuit breaker back on and inspect if the trouble has been solved.
Call A Professional:
If after changing all defective parts as well as resetting your temperature, the hot water heater still isn't working, you may need to get in touch with a professional plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched over or it might be undersized for the quantity of warm water required in your house. Whatever the case may be, a professional plumber would help resolve the issue.
Final thought
Hot water heater issues are not always major. Much of them result from small concerns like a blown fuse or damaged burner. Replacing the malfunctioning parts ought to work. Nevertheless, if you are still unable to resolve the problem, give a call to your closest plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our section on No Hot Water — Water Heater Repair. Thank you so much for taking a few minutes to read our article. Sharing is good. Helping people is fun. We treasure reading our article about What Would Cause My Electric Water Heater to Stop Working?.
Find Out More
Report this page